WJ Fishing Knots Logo

Alberto Knot

  1. Take 8” of Fluorocarbon Line, make a loop
  2. Put line around C and into clamp E
  3. Take 12” of Braided Line and put in clamp A, go over B, and bring under loop from step 1
  4. Wrap around the Fluorocarbon Line 8-10x forward and 8-10x back
  5. Go back to loop from step 1 and take out of the clamp
  6. Tighten the knot

Albright Knot

  1. Take 8” of Fluorocarbon Line, make a loop
  2. Put line around C and into clamp E
  3. Take 12” of Braided Line and put in clamp A, go over B and bring under loop from step 1
  4. Wrap around the Fluorocarbon Line 8-10x forward
  5. Go back to the loop from Step 1 and take out of the clamp
  6. Tighten the knot

FG Knot

  1. Put Braided Line in clamp A, tighten the clamp
  2. Take 14” of Fluorocarbon Line and put in clamp E, tighten (you should have a V)
  3. Take Fluorocarbon Line and put around your Fingers and leave the end 5” long
  4. Take the 5” and weave it through the V and go 10x through the V from left to right
  5. Take out of clamp E and make 3-4 Half Hitch knots from left to right over the Fluorocarbon and Braided Line and tighten the knot
  6. Make 3-4 Half Hitch knot over the Braided Line
  7. Take out of clamp A, tighten the knot

Loop Knot

  1. Take 14” of line, put in clamp A, tighten the clamp
  2. Bring over B and around D
  3. Go through slot and make a small loop
  4. Go through slot on C, then go around D 1x & go through hook
  5. Wrap around the main line 5-6x
  6. Go through slot at D and make a Half Hitch knot
  7. Take out of clamp A, tighten the knot

Clinch Knot

  1. Take 14” of line and put in clamp A, tighten the clamp
  2. Bring over B, put hook on line, and go around D
  3. Wrap around main line 5-6x
  4. Go through slot at D and make a Half Hitch knot
  5. Take out of clamp A, tighten the knot

Trilene Knot

  1. Take 14” of line and put in clamp A, tighten the clamp
  2. Bring over B, put hook on line, and go around D
  3. Wrap around main line 5-6x
  4. Go through slot at D
  5. Take out of clamp A, tighten the knot

San Diego Knot

  1. Take 14” of Braided Line and put in clamp A, tighten the clamp
  2. Bring over B, put hook on line, go around D then C
  3. Wrap around the two lines 5 times
  4. Go between the 2 lines by the hook with end line and then go through the slot on C, tighten halfway
  5. Take line out of clamp A, tighten the knot

Antini Knot

  1. Take 14” of Braided Line, put in clamp A
  2. Go over B, put hook on line, go around D
  3. Wrap over main line 8x
  4. Bring line around C
  5. Go through slot at C 3x then go through slot at D
  6. Go through Slot at C, tighten halfway
  7. Take line out of clamp C, tighten